Overblog Follow this blog
Edit post Administration Create my blog


How to Find Out Better Gold Metal Detector

Have you ever started about the career of gold searching? Come here detectorall and look at the gold metal detector kit, you will know everything about such interesting event, you and any of your friends will have the chance to be rich and to be happy.

Please pay attention, it is the time to begin the gold searching career now, with the right place detectorall and with the right tool- gold metal detector, you will know it better and live it better. Next you should know something about the digging process. You might also look for patches of mineralized soil that looks different than the surrounding soil. It might turn out to be the remains of a mineralized outcropping that has worn away and may have some gold. Additionally, quartz blow outs on the side of a hill can contain gold, especially if the quartz is dirty with lots of minerals. While, gold can be present in the white quartz, it is usually more common in dirty quartz. If you notice signs of possible gold, try looking for gullies and gulches that can concentrate the gold. Also, search the slopes leading into the gullies as some of the larger nuggets may not have made it to the gut of the gully. When you search gullies that have a lot of mineralized bedrock, try sweeping the coil parallel to the streaks of mineralization instead of against it. This will help the metal detector, especially the gold metal detectors from detectorall to better cope with the mineralization.

Gold, being dense, will work its way down to bedrock. If you are using a gold metal detector and the mineralized soil limits your detection depth on a quarter ounce nugget to 6 inches, then what are your chances of finding the nugget if it is resting on bedrock at a depth of 15 inches? In this instance, the depth of the soil would make the location a poor place to search with a VLF metal detector, but might be ok for some PI metal detectors. The point is that you should be aware of the soil depth in the area you are searching so that you can focus on more productive areas.

When using a gold metal detector, look for areas where bedrock is exposed. The areas surround the protruding bedrock will likely be shallow. If using a PI metal detector, it might be worth digging a test hole to find out the depth. Pi metal detectors are capable of detecting down to bedrock at greater depths which is one of the reasons whey so many large nuggets have been found since the PIs came onto the market.

Some other metal detector products from detectorall will detect deeper than DD coils, but they have a harder time handling high mineralization and they require more overlapping of the sweeps since the field created under the coil is in a cone shape. DD coils handle the mineralization really well, but get a little less depth. Their field creates a hot strip down the center of the coil from front to back. This means that you will not have to overlap your sweeps as much. Each coil has its place.

When searching a new area, it is not necessary to start out by gridding an area, unless you are certain it contains gold and has been worked before. It the area has not been hit well by other detectors, you might try putting on a larger coil to cover more ground until you find a nugget. Once you find a nugget, it is time to search the area more closely as another nugget may be nearby. It might even be a patch.

Happy hutting starts from the right tool- gold metal detector, the right place www.detectorall.com .

To be informed of the latest articles, subscribe:


Hosted by Overblog